TY - STD TI - Benjamin W. The work of art in the age of mechanical reproduction, translated by Underwood JA, editor. London: Penguin Group; 2008. ID - ref1 ER - TY - CHAP AU - Bechtold, T. ED - Bechtold, T. PY - 2011 DA - 2011// TI - Rapid prototyping in museum collections. Technology—applications—durability BT - Future talks 011 technology and conservation of modern materials in design PB - Die Neue Sammlung, The International Design Museum CY - Munich ID - Bechtold2011 ER - TY - STD TI - BS ISO/ASTM 52900:2015. Additive manufacturing—general principles—terminology. London: BSI Standards Limited; 2016. ID - ref3 ER - TY - STD TI - Minder R. At Museo del Prado, blind visitors can touch masterpieces. The New York Times. 2015. http://www.nytimes.com/2015/03/07/arts/design/at-museo-del-prado-blind-visitors-can-touch-masterpieces.html. Accessed 2 Apr 2015. UR - http://www.nytimes.com/2015/03/07/arts/design/at-museo-del-prado-blind-visitors-can-touch-masterpieces.html ID - ref4 ER - TY - STD TI - Neumüller M, Reichinger A, Rist F, Kern C. 3D printing for cultural heritage: preservation, accessibility, research and education. In: Ioannides M, Quak E, editors. 3D research challenges in cultural heritage: a roadmao in digital heritage preservation. Heidelberg: Springer; 2014. p. 119–34. http://link.springer.com/chapter/10.1007/978-3-662-44630-09. Accessed 2 Apr 2015. UR - http://link.springer.com/chapter/10.1007/978-3-662-44630-09 ID - ref5 ER - TY - STD TI - Sloan R. Dancing the flip-flop. 2014. http://www.robinsloan.com/note/flip-flop/2014. Accessed 3 Apr 2015. UR - http://www.robinsloan.com/note/flip-flop/2014 ID - ref6 ER - TY - STD TI - Neely N, Langer M. Please feel the museum: the emergence of 3d printing and scanning. MW2013: museums and the web. 2013. http://mw2013.museumsandtheweb.com/paper/please-feel-the-museum-the-emergence-of-3d-printing-and-scanning/. Accessed 3 Apr 2015. UR - http://mw2013.museumsandtheweb.com/paper/please-feel-the-museum-the-emergence-of-3d-printing-and-scanning/ ID - ref7 ER - TY - STD TI - McDevitt N. Facial reconstructions bring redpath mummies to life. 2014 http://publications.mcgill.ca/reporter/2014/01/facial-reconstructions-bring-redpath-mummies-to-life/2014. Accessed 6 Jan 2016. UR - http://publications.mcgill.ca/reporter/2014/01/facial-reconstructions-bring-redpath-mummies-to-life/2014 ID - ref8 ER - TY - STD TI - Schultz, C. A bust of Richard III, 3D-printed from a scan of his recently exhumed skull. 2013. http://www.smithsonianmag.com/smart-news/a-bust-of-richard-iii-3d-printed-from-a-scan-of-his-recently-exhumed-skull-65419134/. Accessed 6 Jan 2016. UR - http://www.smithsonianmag.com/smart-news/a-bust-of-richard-iii-3d-printed-from-a-scan-of-his-recently-exhumed-skull-65419134/ ID - ref9 ER - TY - STD TI - Nicolas T, Gaugne R, Tavernier C, Gouranton V, Arnaldi B. Preservative approach to study encased archaeological artefacts. In: Ioannides M, Quak E, editors. 3D research challenges in cultural heritage: a roadmap in digital heritage preservation. Heidelberg: Springer; 2014. p. 332–41. doi:10.1007/978-3-319-13695-0_32. ID - ref10 ER - TY - JOUR AU - Fantini, M. AU - Crescenzio, F. AU - Persiani, F. AU - Benazzi, S. AU - Gruppioni, G. PY - 2008 DA - 2008// TI - 3D restitution, restoration and prototyping of a medieval damaged skull JO - Rapid Prototyp J VL - 14 UR - https://doi.org/10.1108/13552540810907992 DO - 10.1108/13552540810907992 ID - Fantini2008 ER - TY - JOUR AU - Soe, S. P. AU - Eyers, D. R. AU - Jones, T. AU - Nayling, N. PY - 2012 DA - 2012// TI - Additive manufacturing for archaeological reconstruction of a medieval ship JO - Rapid Prototyp J VL - 18 UR - https://doi.org/10.1108/13552541211271983 DO - 10.1108/13552541211271983 ID - Soe2012 ER - TY - STD TI - Allen Z, James P. The conservation of marie antoinette’s chair. 2015. http://www.vam.ac.uk/blog/conservation-blog/the-conservation-of-marie-antoinettes-chair. Accessed 3 Apr 2015. UR - http://www.vam.ac.uk/blog/conservation-blog/the-conservation-of-marie-antoinettes-chair ID - ref13 ER - TY - STD TI - Frood E, Parkinson R, Lowe A. Conserving by copying: 3D printing Tutankhamun’s tomb. http://partnership.ox.ac.uk/conserving-by-copying-3d-printing-tutankhamuns-tomb/#.VR6kXd6Gqzc. Accessed 3 Apr 2015. UR - http://partnership.ox.ac.uk/conserving-by-copying-3d-printing-tutankhamuns-tomb/%23.VR6kXd6Gqzc ID - ref14 ER - TY - STD TI - Kingsley P. Exact replica of Tuthankhamen’s tomb unveiled in Egypt. The Guardian. 2014. http://www.theguardian.com/world/2014/may/01/exact-replica-tutankhamun-tomb-egypt. Accessed 14 Mar 2016. UR - http://www.theguardian.com/world/2014/may/01/exact-replica-tutankhamun-tomb-egypt ID - ref15 ER - TY - JOUR AU - Karp, C. PY - 2004 DA - 2004// TI - Digital heritage in digital museums JO - Mus Int VL - 56 UR - https://doi.org/10.1111/j.1350-0775.2004.00457.x DO - 10.1111/j.1350-0775.2004.00457.x ID - Karp2004 ER - TY - STD TI - Madden O, Learner T. Preserving plastics: an evolving material, a maturing proffession. Conservation perspectives: The GCI Newsletter. Conservation of plastics. Spring 2014. p. 4–9. http://www.getty.edu/conservation/publications_resources/newsletters/pdf/v29n1.pdf. Accessed 29 Dec 2015. UR - http://www.getty.edu/conservation/publications_resources/newsletters/pdf/v29n1.pdf ID - ref17 ER - TY - STD TI - Albus SB et al. Plastic art—a precarious success story. Cologne: AXA Art Versicherung. 2007. http://broker-it.axa-art.info/fileadmin/Cluster/IT/PRODUKTE/Additional_Material/Plastic_Art.pdf. Accessed 14 Mar 2016. UR - http://broker-it.axa-art.info/fileadmin/Cluster/IT/PRODUKTE/Additional_Material/Plastic_Art.pdf ID - ref18 ER - TY - JOUR AU - Drizo, A. AU - Pegna, J. PY - 2006 DA - 2006// TI - Environmental impacts of rapid prototyping: an overview of research to date JO - Rapid Prototyp J VL - 12 UR - https://doi.org/10.1108/13552540610652393 DO - 10.1108/13552540610652393 ID - Drizo2006 ER - TY - BOOK PY - 2012 DA - 2012// TI - The preservation of plastic artefacts in museum collections PB - CTHS CY - Paris ID - ref20 ER - TY - BOOK AU - Shashoua, Y. PY - 2008 DA - 2008// TI - Conservation of plastics: materials science, degradation and preservation PB - Butterworth-Heineman, Elsevier CY - Oxford ID - Shashoua2008 ER - TY - STD TI - OBJET RGD515. MSDS ID: DOC-06108_C [Online] Stratasys GmbH: Rheinmünster, Germany, January 22, 2013. http://www.stratasys.co.jp/materials/material-safety-data-sheets/polyjet/~/media/6125876D931544A3918C3CA23E8220E1.pdf. Accessed 15 Feb 2016. UR - http://www.stratasys.co.jp/materials/material-safety-data-sheets/polyjet/%7e/media/6125876D931544A3918C3CA23E8220E1.pdf ID - ref22 ER - TY - CHAP AU - Madsac, D. ED - Bechtold, T. PY - 2011 DA - 2011// TI - Rapid prototyping–rapid ageing? Technology and ageing properties of contemporary art and design objects made by rapid prototyping technologies BT - Future talks 011 technology and conservation of modern materials in design PB - Die Neue Sammlung, The International Museum CY - Munich ID - Madsac2011 ER - TY - JOUR AU - Stanic, M. AU - Lozo, B. AU - Svetec, D. G. PY - 2012 DA - 2012// TI - Colorimetric design properties and stability of 3D prints JO - Rapid Prototyp J VL - 18 UR - https://doi.org/10.1108/13552541211212104 DO - 10.1108/13552541211212104 ID - Stanic2012 ER - TY - BOOK AU - Noorani, R. PY - 2006 DA - 2006// TI - Rapid prototyping: principles and applications PB - Wiley CY - New Jersey ID - Noorani2006 ER - TY - JOUR AU - Pham, D. T. AU - Gault, R. S. PY - 1998 DA - 1998// TI - A comparison of rapid prototyping technologies JO - Int J Mach Tools Manuf VL - 38 UR - https://doi.org/10.1016/S0890-6955(97)00137-5 DO - 10.1016/S0890-6955(97)00137-5 ID - Pham1998 ER - TY - BOOK AU - Chua, C. K. AU - Leong, K. F. PY - 2014 DA - 2014// TI - 3D printing and additive manufacturing: principles and applications PB - World Scientific CY - Singapore UR - https://doi.org/10.1142/9008 DO - 10.1142/9008 ID - Chua2014 ER - TY - JOUR AU - Levy, G. N. AU - Schnidel, R. AU - Kruth, J. P. PY - 2003 DA - 2003// TI - Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives JO - CIRP Ann Manuf Technol VL - 52 UR - https://doi.org/10.1016/S0007-8506(07)60206-6 DO - 10.1016/S0007-8506(07)60206-6 ID - Levy2003 ER - TY - JOUR AU - Yan, X. AU - Gu, P. PY - 1996 DA - 1996// TI - A review of rapid prototyping technologies and systems JO - Comput Aided Des VL - 28 UR - https://doi.org/10.1016/0010-4485(95)00035-6 DO - 10.1016/0010-4485(95)00035-6 ID - Yan1996 ER - TY - BOOK AU - Chua, C. K. AU - Leong, K. F. AU - Lim, C. S. PY - 2010 DA - 2010// TI - Rapid prototyping: principles and applications PB - World Scientific Publishing Co., Pte. Ltd CY - Singapore UR - https://doi.org/10.1142/6665 DO - 10.1142/6665 ID - Chua2010 ER - TY - BOOK AU - Wohlers, T. AU - Caffrey, T. PY - 2015 DA - 2015// TI - Wohlers report 2015 PB - Wohlers Associates CY - Colorado ID - Wohlers2015 ER - TY - STD TI - Wohler T, Gornet T. Viewpoint: history of additive fabrication (part 1). 2007. http://www.wohlersassociates.com/MarApr08TCT.htm. Accessed 30 Nov 2012. UR - http://www.wohlersassociates.com/MarApr08TCT.htm ID - ref32 ER - TY - STD TI - ASTM Standard F2792-12a. Standard terminology for additive manufacturing technologies ASTM International, West Conshohocken. 2012. ID - ref33 ER - TY - CHAP AU - Nguyen, Q. T. ED - Meyer, T. ED - Keurentjes, J. PY - 2005 DA - 2005// TI - Polymer degradation and stabilization BT - Handbook of polymer reaction engineering PB - Wiley-VCH CY - Weinheim ID - Nguyen2005 ER - TY - CHAP AU - Rychlý, J. AU - Strlič, M. ED - Strlič, M. ED - Kolar, J. PY - 2005 DA - 2005// TI - Degradation and ageing of polymers BT - Ageing and stabilization of paper PB - National and University Library CY - Ljubljana ID - Rychlý2005 ER - TY - CHAP AU - McNeill, I. C. ED - Allen, N. S. ED - Edge, M. ED - Horie, M. V. PY - 1992 DA - 1992// TI - Fundamental aspects of polymer degradation BT - Polymers in conservation PB - Royal Society of Chemistry CY - Cambridge ID - McNeill1992 ER - TY - JOUR AU - Celina, M. C. PY - 2013 DA - 2013// TI - Review of polymer oxidation and its relationship with materials performance and lifetime prediction JO - Polym Degrad Stab VL - 98 UR - https://doi.org/10.1016/j.polymdegradstab.2013.06.024 DO - 10.1016/j.polymdegradstab.2013.06.024 ID - Celina2013 ER - TY - BOOK AU - Grassie, N. AU - Scott, G. PY - 1985 DA - 1985// TI - Polymer degradation and stabilisation PB - Cambridge University Press CY - Cambridge ID - Grassie1985 ER - TY - STD TI - Partanen J. Solid state lasers for stereolithography. In: 7th annual solid freeform fabrication symposium proceedings. 1996. p. 369–76. http://sffsymposium.engr.utexas.edu/Manuscripts/1996/1996-45-Partanen.pdf. Accessed 6 Jan 2016. UR - http://sffsymposium.engr.utexas.edu/Manuscripts/1996/1996-45-Partanen.pdf ID - ref39 ER - TY - JOUR AU - Rauch, T. AU - Delmdahl, R. PY - 2009 DA - 2009// TI - Advanced UV lasers enable precision processing JO - Laser Tech J VL - 6 UR - https://doi.org/10.1002/latj.200990034 DO - 10.1002/latj.200990034 ID - Rauch2009 ER - TY - CHAP AU - Hanemann, T. AU - Bauer, W. AU - Knitter, R. AU - Woias, P. ED - Leondes, C. T. PY - 1992 DA - 1992// TI - Rapid prototyping and rapid tooling techniques for manufacturing of silicon, polymer, metal and ceramic microdevices BT - MEMS/NEMS: handbook techniques and applications PB - Springer CY - New York ID - Hanemann1992 ER - TY - STD TI - Salmoria GV, Gonzalez VJ, Ahrens CH, Soldi V, Pires ATN. Stereolithography Somos 7110 photosensitive resin: study of curing kinetic and thermal degradation. J Mater Process Technol. 2005;168(1):164–71. http://linkinghub.elsevier.com/retrieve/. Accessed 9 Apr 2015. UR - http://linkinghub.elsevier.com/retrieve/ ID - ref42 ER - TY - JOUR AU - Trȍger, C. AU - Bens, A. T. AU - Bermes, G. AU - Klemmer, R. AU - Lenz, J. AU - Irsen, S. PY - 2008 DA - 2008// TI - Ageing of acrylate based resins for stereolithography: thermal and humidity ageing behavior studies JO - Rapid Prototyp J VL - 14 UR - https://doi.org/10.1108/13552540810907983 DO - 10.1108/13552540810907983 ID - Trȍger2008 ER - TY - JOUR AU - Mansour, S. AU - Gilbert, M. AU - Hague, R. PY - 2007 DA - 2007// TI - A study of the impact of short-term ageing on the mechanical properties of a stereolithography resin JO - Mater Sci Eng A. VL - 447 UR - https://doi.org/10.1016/j.msea.2006.10.007 DO - 10.1016/j.msea.2006.10.007 ID - Mansour2007 ER - TY - STD TI - ISO 527-1 and 2, Plastics—determination of tensile properties. 1996. ID - ref45 ER - TY - STD TI - ISO 178, Plastics—determination of flexural properties. 1997. ID - ref46 ER - TY - STD TI - ISO 180, Plastics—determination of Izod impact strength. 2001. ID - ref47 ER - TY - JOUR AU - Puebla, K. AU - Arcaute, K. AU - Quintana, R. AU - Wicker, R. B. PY - 2012 DA - 2012// TI - Effects of environmental conditions, aging and build orientation on the mechanical properties of ASTM type I specimens manufactured via stereolithography JO - Rapid Prototyp J VL - 18 UR - https://doi.org/10.1108/13552541211250373 DO - 10.1108/13552541211250373 ID - Puebla2012 ER - TY - STD TI - ASTM Standard D638. 2005. Standard test method for tensile properties of plastics. ASTM International, West Conshohocken. 2012. doi:10.1520/D0638-14. ID - ref49 ER - TY - STD TI - DIN 53504:1994 Testing of rubber; determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test. Deutsches Institut Fur Normung E.V. (German National Standard). ID - ref50 ER - TY - STD TI - DIN53508:2000 Testing of rubber—accelerated ageing. Deutsches Institut Fur Normung E.V. (German National Standard). ID - ref51 ER - TY - STD TI - DIN EN ISO 2440:2000–01 Flexible and rigid cellular polymeric materials—accelerated ageing tests. Deutsches Institut Fur Normung E.V. (German National Standard). ID - ref52 ER - TY - STD TI - Salmoria GV, Klauss P, Pires ATN, Roeder J, Soldi V. Investigations on cure kinetics and thermal degradation of stereolithography Renshape™ 5260 photosensitive resin. Polym Test. 2008;27(6):698–704. http://linkinghub.elsevier.com/retrieve/. Accessed 12 Jan 2016. UR - http://linkinghub.elsevier.com/retrieve/ ID - ref53 ER - TY - JOUR AU - Berger, U. PY - 2015 DA - 2015// TI - Aspects of accuracy and precision in the additive manufacturing of plastic gears JO - Virtual Phys Prototyp VL - 10 UR - https://doi.org/10.1080/17452759.2015.1026127 DO - 10.1080/17452759.2015.1026127 ID - Berger2015 ER - TY - JOUR AU - Yap, Y. L. AU - Yeong, W. Y. PY - 2015 DA - 2015// TI - Shape recovery effect of 3D printed polymeric honeycomb: This paper studies the elastic behaviour of different honeycomb structures produced by PolyJet technology JO - Virtual Phys Prototyp VL - 10 UR - https://doi.org/10.1080/17452759.2015.1060350 DO - 10.1080/17452759.2015.1060350 ID - Yap2015 ER - TY - JOUR AU - Khoo, Z. X. AU - Teoh, J. E. M. AU - Liu, Y. AU - Chua, C. K. AU - Yang, S. AU - An, J. AU - Yeong, W. Y. PY - 2015 DA - 2015// TI - 3D printing of smart materials: a review on recent progresses in 4D printing JO - Virtual Phys Prototyp VL - 10 UR - https://doi.org/10.1080/17452759.2015.1097054 DO - 10.1080/17452759.2015.1097054 ID - Khoo2015 ER - TY - JOUR AU - Costa, C. A. AU - Linzmaier, P. R. AU - Pasquali, F. AU - Rezende, R. PY - 2013 DA - 2013// TI - Conference Paper: 6th IFAC Conference Management and Control of Production and Logistics JO - At Fortaleza. ID - Costa2013 ER - TY - STD TI - Goodridge RD, Tuck CJ, Hague RJM. Laser sintering of polyamides and other polymers. Prog Mater Sci. 2011;57:229–67. http://www.sciencedirect.com/science/article/. UR - http://www.sciencedirect.com/science/article/ ID - ref58 ER - TY - JOUR AU - Kruth, J. P. PY - 2003 DA - 2003// TI - Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives JO - CIRP Annal Manuf Technol VL - 52 UR - https://doi.org/10.1016/S0007-8506(07)60206-6 DO - 10.1016/S0007-8506(07)60206-6 ID - Kruth2003 ER - TY - JOUR AU - Dotchev, K. AU - Yusoff, W. PY - 2009 DA - 2009// TI - Recycling of polyamide 12 based powders in the laser sintering process JO - Rapid Prototyp J VL - 15 UR - https://doi.org/10.1108/13552540910960299 DO - 10.1108/13552540910960299 ID - Dotchev2009 ER - TY - JOUR AU - Blattmeier, M. AU - Witt, G. AU - Wortberg, J. AU - Eggert, J. AU - Toepker, J. PY - 2012 DA - 2012// TI - Influence of surface characteristics on fatigue behaviour of laser sintered plastics JO - Rapid Prototyp J VL - 18 UR - https://doi.org/10.1108/13552541211212140 DO - 10.1108/13552541211212140 ID - Blattmeier2012 ER - TY - JOUR AU - Starr, T. L. AU - Gornet, J. T. AU - Usher, J. S. PY - 2011 DA - 2011// TI - The effect of process conditions on mechanical properties of laser-sintered nylon JO - Rapid Prototyp J. VL - 17 UR - https://doi.org/10.1108/13552541111184143 DO - 10.1108/13552541111184143 ID - Starr2011 ER - TY - JOUR AU - Cooke, W. AU - Tomlinson, R. A. AU - Burguete, R. AU - Johns, D. AU - Vanard, G. PY - 2011 DA - 2011// TI - Anisotropy, homogeneity and aging in an SLS polymer JO - Rapid Prototyp J VL - 17 UR - https://doi.org/10.1108/13552541111138397 DO - 10.1108/13552541111138397 ID - Cooke2011 ER - TY - JOUR AU - Majeweski, C. AU - Hopkinson, N. PY - 2011 DA - 2011// TI - Effect of section thickness and build orientation on tensile properties and material characteristics of laser sintered nylon-12 JO - Rapid Prototyp J. VL - 17 UR - https://doi.org/10.1108/13552541111124743 DO - 10.1108/13552541111124743 ID - Majeweski2011 ER - TY - JOUR AU - Dimitrov, D. AU - Schreve, K. AU - Beer, N. PY - 2006 DA - 2006// TI - Advances in three-dimensional printing—state of the art and future perspectives JO - Rapid Prototyp J VL - 12 UR - https://doi.org/10.1108/13552540610670717 DO - 10.1108/13552540610670717 ID - Dimitrov2006 ER - TY - JOUR AU - Gibson, I. AU - Ming, L. W. PY - 2001 DA - 2001// TI - Colour RP JO - Rapid Prototyp J. VL - 7 UR - https://doi.org/10.1108/EUM0000000005894 DO - 10.1108/EUM0000000005894 ID - Gibson2001 ER - TY - STD TI - Z Corporation. The fastest most afforable color 3D printing. Brochure: 3DP-BRO-2010. Z Corporation, Burlington, USA. 2010. ID - ref67 ER - TY - STD TI - Z Corporation. 3DP™ Consumer Catalog. Part Number 09572. 2009. http://www.bibus.sk/fileadmin/product_data/3D-Systems/documents/zcorp_series_3dp_consumables_catalogue_en_f19_2009.pdf. UR - http://www.bibus.sk/fileadmin/product_data/3D-Systems/documents/zcorp_series_3dp_consumables_catalogue_en_f19_2009.pdf ID - ref68 ER - TY - STD TI - Z Corp. zp130 powder MSDS 8/04. 2005 http://ytec3d.com/wp-content/uploads/2014/08/zp130.pdf. Accessed 14 Mar 2016. UR - http://ytec3d.com/wp-content/uploads/2014/08/zp130.pdf ID - ref69 ER - TY - STD TI - Z Corp. Z Corp. zp150 powder MSDS 83013. 2009. https://www.shapeways.com/rrstatic/material_docs/msds-sandstone.pdf. Accessed 14 Mar 2016. UR - https://www.shapeways.com/rrstatic/material_docs/msds-sandstone.pdf ID - ref70 ER - TY - STD TI - Alam A, Bredt JF, Clark N, Flynn M, Sprauer J, Williams DX. Three-dimensional printing material system with improved color, article performance, and ease of use. Google Patents. 2009. http://www.google.com/patents/EP2109528A1?cl=en. Accessed 14 Mar 2016. UR - http://www.google.com/patents/EP2109528A1?cl=en ID - ref71 ER - TY - JOUR AU - Lazzari, M. AU - Ana Ledo-Suárez, A. AU - López, T. AU - Scalarone, D. AU - López-Quintela, M. A. PY - 2011 DA - 2011// TI - Plastic matters: an analytical procedure to evaluate the degradability of contemporary works of art JO - Anal Bioanal Chem VL - 399 UR - https://doi.org/10.1007/s00216-011-4664-5 DO - 10.1007/s00216-011-4664-5 ID - Lazzari2011 ER - TY - BOOK PY - 2005 DA - 2005// TI - F2366-05 standard practice for determining the relative lightfastness of ink jet prints exposed to window filtered daylight using a xenon arc light apparatus PB - American Society for Testing and Materials International CY - West Conshohocken ID - ref73 ER - TY - BOOK PY - 2009 DA - 2009// TI - D3424-09 standard practice for evaluating the relative lightfastness and weatherability of printed matter PB - American Society for Testing and Materials International CY - West Conshohocken ID - ref74 ER - TY - STD TI - ISO 11341:2004 Paints and varnishes—artificial weathering and exposure to artificial radiation—exposure to filtered xenon-arc radiation. 2004. ID - ref75 ER - TY - JOUR AU - Ahn, S. AU - Montero, M. AU - Odell, D. AU - Roundy, S. AU - Wright, P. K. PY - 2002 DA - 2002// TI - Anisotropic material properties of fused deposition modeling ABS JO - Rapid Prototyp J. VL - 8 UR - https://doi.org/10.1108/13552540210441166 DO - 10.1108/13552540210441166 ID - Ahn2002 ER - TY - JOUR AU - Karahaliou, E. -. K. AU - Tarantili, P. A. PY - 2015 DA - 2015// TI - Stability of ABS compounds subjected to repeated cycles of extrusion processing JO - Polym Eng Sci VL - 49 UR - https://doi.org/10.1002/pen.21480 DO - 10.1002/pen.21480 ID - Karahaliou2015 ER - TY - BOOK AU - Scheirs, J. PY - 2000 DA - 2000// TI - Compositional and failure analysis of polymers: a practical approach PB - Wiley CY - Chichester ID - Scheirs2000 ER - TY - STD TI - Adams ME, Buckley DJ, Colborn RE. Acrylonitrile–butadiene–styrene polymers. Rapra review reports, vol 6(10). Rapra Technology Ltd.; 1993; ID - ref79 ER - TY - JOUR AU - Gurrala, P. K. AU - Regalla, S. P. PY - 2014 DA - 2014// TI - Multi-objective optimisation of strength and volumetric shrinkage of FDM parts: a multi-objective optimization scheme is used to optimize the strength and volumetric shrinkage of FDM parts considering different process parameters JO - Virtual Phys Prototyp VL - 9 UR - https://doi.org/10.1080/17452759.2014.898851 DO - 10.1080/17452759.2014.898851 ID - Gurrala2014 ER - TY - CHAP AU - Tsuji, H. ED - Auras, R. PY - 2010 DA - 2010// TI - Hydrolytic degradation BT - Poly(lactic acid): synthesis, structures, properties, processing, and applications PB - Wiley CY - Hoboken ID - Tsuji2010 ER - TY - CHAP AU - Nishida, H. ED - Auras, R. PY - 2010 DA - 2010// TI - Thermal Degradation BT - Poly(lactic acid): synthesis, structures, properties, processing, and applications PB - Wiley CY - Hoboken ID - Nishida2010 ER - TY - JOUR AU - Signori, F. AU - Coltelli, M. B. AU - Bronco, S. PY - 2009 DA - 2009// TI - Thermal degradation of poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) and their blends upon melt processing JO - Polym Degrad Stab VL - 94 UR - https://doi.org/10.1016/j.polymdegradstab.2008.10.004 DO - 10.1016/j.polymdegradstab.2008.10.004 ID - Signori2009 ER - TY - JOUR AU - Garlotta, D. PY - 2001 DA - 2001// TI - A literature review of poly(lactic) acid JO - J Polym Environ VL - 9 UR - https://doi.org/10.1023/A:1020200822435 DO - 10.1023/A:1020200822435 ID - Garlotta2001 ER -