Skip to main content
Fig. 8 | Heritage Science

Fig. 8

From: 3D printing of molds for the creation of facsimiles and volumetric reintegrations in wax anatomical sculptures

Fig. 8

Analysis of PLA deformations when hot wax is applied a Side of the specimen before wax application, thickness 0.5 mm b Side of the specimen before wax application, thickness 1 mm c Side of the specimen before wax application, thickness 1.5 mm d, e, and f Wax application g Side of the specimen after application of the wax, thickness 0.5 mm h Side of the specimen after application of the wax, thickness 1 mm i Side of the specimen after application of the wax, thickness 1.5 mm

Back to article page