3D printing of molds for the creation of facsimiles and volumetric reintegrations in wax anatomical sculptures

Heritage Science

Table 1 3D printing materials and printing characteristics

Printing material	Material density g/cm³	Layer height	Wall thickness	Filling pattern	Print speed mm/s	Plate adhesion pattern	Printing temperature (ºC)	Temperature in the warm bed (ºC)
ABS	1.04	0.06	1.5	Grid	50	Raft	240	85 ºC
PLA Tough	1.22	0.06	1.5	Grid	50	Raft	210	60 ºC
PLA	1.24	0.06	1.5	Grid	50	Raft	215	60 ºC
INNOVATEFIL PA HT	1.20	0.06	1.5	Grid	50	Raft	270	90 ºC
HIPS	1.05	0.06	1.5	Grid	50	Raft	240	90 ºC
PP	0.90	0.1	1.5	Grid	25	Raft	225	80 ºC
TPU 95	1.22	0.1	1.5	Grid	25	Raft	225	60 ºC
FLEX	1.21	0.1	1.5	Grid	25	Raft	230	60 ºC
PETG	1.27	0.06	1.5	Grid	50	Raft	240	80 ºC
PLA 3D870	1.22	0.06	1.5	Grid	50	Raft	220	60 ºC
ASA	1.07	0.06	1.5	Grid	50	Raft	250	100 ºC
INNOVATEFIL POLYCARBONATE	1.20	0.06	1.5	Grid	50	Raft	260ºC	100 ºC
PVA	1.23	0.06	1.5	Grid	50	Raft	215ºC	60 ºC
NYLSTRONG	1.58	0.06	1.5	Grid	50	Raft	260ºC	100 ºC